JBS CURE PLUS-WB is synthetic wax emulsion based continuous film forming curing compound. It can be either
supplied in clear form or be white pigmented (sold under the variant WP). The white pigmented form helps in light
reflectance which effectively prevents premature water loss from the concrete due to heat of hydration and sunlight.
Features:
High curing efficiency.
Reduces plastic cracking.
Ensures optimum strength achievement.
Reduces labour cost and eliminates need for alternative curing systems such as hessian-watering.
Saves water usage and useful for regions facing acute water shortage.
Reduces surface dusting and makes it water repellent.
Light reflective grades minimize solar temperature gain.
Water based and eco-friendly.
Download PDF
After spraying, no water should be applied and surface not disturbed.
o Do not walk on the surface until fully dry and care must be taken to prevent film breakage.
o For better bonding of subsequent treatment, it is advised to remove the film before applying subsequent plasters, coating or screed.
PARAMETERS SPECIFICATION TEST RESULTS
Physical Appearance Transparent or Milky White
Flash Point NA
Water Retention ASTM C 309 PASS
Drying Time Within 2 hours at 27OC
Specific Gravity at 27OC 0.99 – 1.02
Related Products
